FranklinWH battery installers in Salt Lake City, UT.

What a FranklinWH system actually is

FranklinWH is two products that only make sense together: the aPower 2 battery and the aGate controller that sits between your solar, the grid, the battery and, if you have one, a generator. Because the system is AC-coupled it does not care whose inverter is on your solar, which makes it the cleanest whole-home retrofit in this comparison. Each aPower 2 is a large single block with a high continuous output, and the aGate can manage a stack of them. The trade-off is that the controller is the product — a quote that treats it as an optional extra has misunderstood what you are buying.

• aPower 2 — Large single block, stackable behind one controller. AC-coupled LFP battery with its own inverter — the storage half of the system.
• aGate — One per home. The energy management center that integrates solar, grid, battery and generator, meters the home and sheds loads in an outage.
• Smart Circuits and generator input — Optional. Per-circuit control of critical loads, and a generator input so a portable or standby unit recharges the battery.

FranklinWH at a glance — sourced

• Current FranklinWH line-up in the US: aPower 2 (15 kWh usable). source
• FranklinWH is AC-coupled: it sits beside the existing solar inverter, which stays in place on a retrofit. source
• Usable capacity runs from 15 kWh to 225 kWh. source
• Capacity can be added later without replacing the inverter. source
• The manufacturer warranty is 15 years. source
• It works with inverters from other brands, not only FranklinWH's. source
• Listed models are certified to UL 9540, the safety standard permit offices and utilities check for home storage. source

A good fit in Salt Lake City if…

• Homes with existing solar that want whole-home backup without replacing a working inverter
• Households in outage-prone areas that want a generator folded into the same system
• Buyers who want load management and per-circuit control, not just storage
• Larger homes where one big block covers the evening peak and a second covers the outage plan

Look at something else if…

• You are buying solar and storage together and want the simplest single-box install
• You want capacity in small increments rather than large blocks
• You do not need whole-home backup and would rather not pay for the controller
• Wall space is tight — the block and the controller both need room

Why the installer matters more than the battery

The hardware is rarely the problem on a bad battery install — the design, the panel work and the commissioning are. Installers are vetted before they join — typically 2+ years in business with a track record of decent reviews. Matching depends on current participating installers for your address and brand. There may be fewer than three or no matches. Free for homeowners.

What specifically goes wrong on a FranklinWH install

• The aGate placement relative to the main service panel is the design decision that decides how much electrical work the job needs
• AC coupling means existing solar has to be metered through the controller correctly, or self-consumption never performs as modeled
• Load-shedding priorities configured wrong at commissioning leave owners surprised by what dropped during the first outage
• Generator inputs need a compatible generator and a transfer arrangement the installer actually designs, not a socket on the wall
• Large units need a solid mounting surface and a location that stays inside the operating temperature range

This is exactly what we vet for — get my FranklinWH quotes in Salt Lake City.

Comparing FranklinWH quotes in Salt Lake City

We don't publish price bands, because installed prices move constantly and depend on your roof, service panel and utility. What we can tell you is what to hold constant so three quotes are actually comparable — match these first, then compare dollars per usable kWh.

1. Whether the aGate is quoted as the core of the system or as an add-on — it is the core
2. How many aPower 2 units, and whether the stack is sized to your outage plan or to your evening peak
3. Whether generator integration is included, and what kind of generator the design assumes
4. How your existing solar inverter is being metered through the aGate, which decides how well self-consumption works
5. Panel work: whether the aGate replaces or sits beside your main service panel

A cheaper quote that skips backup hardware, assumes an inverter you don't have, or quietly changes the configuration isn't cheaper — it's a different job.

Request FranklinWH quotes on the same scope, subject to participating-installer availability for your address in Salt Lake City.

Battery incentives in Utah

• Residential Clean Energy Credit (IRC §25D) (federal) — The 30% federal tax credit for home solar and battery storage no longer applies to systems placed in service from January 1, 2026. What ended and what still applies
• Utah — no state battery program has been verified on this site yet. Ask each installer what your verified utility offers and to show the program page.

The Salt Lake City numbers

A delivery utility has not been verified for this Salt Lake City page. Identify yours by the service address before checking FranklinWH interconnection, export terms or rates; an overlapping ZIP code is not enough.

The Census Bureau estimates 217,783 residents in Salt Lake City in 2024. The city record uses Salt Lake County as its county reference and includes 20 overlapping ZIP codes. These are geographic facts, not evidence of participating FranklinWH installers or local availability.

The solar-resource sample for Salt Lake City is at 40.776928° latitude, -111.930991° longitude. Census land-overlap records include ZIPs 84116, 84104, 84103, 84108, 84106, 84105, 84044, 84102 (first eight by land overlap). These locate the page data; they do not establish utility territory or installer coverage.

NASA POWER climatology gives Salt Lake City an annual average of 4.8 peak sun hours per day. This regional solar-resource measure does not predict rooftop production or whether a FranklinWH will refill. Array size, orientation, shading, equipment losses, household use and battery settings all need a site-specific assessment.

At Salt Lake City's coordinates, NASA POWER climatology ranges from about 7.8 peak sun hours per day in Jun to 1.9 in Dec — a 4.1× ratio in the solar resource, not a measured generation ratio. For FranklinWH, assess seasonal production and household loads together; neither the annual average nor the lowest month alone determines battery capacity or refill frequency.

FranklinWH vs Tesla Powerwall 3

• Where FranklinWH wins — A cleaner retrofit onto any existing solar, generator integration and load shedding in the base design, a larger single block with more continuous output, and a longer warranty framing.
• Where FranklinWH loses — No integrated solar inverter for a new install, more hardware on the wall, a thinner installer base than Tesla, and a system that is harder to justify if you only want a small battery.

We don't sell batteries, so we have no reason to talk one up.

What owning a FranklinWH is actually like

Spec sheets stop being interesting about a week after install. These are the things owners notice in year one.

• The app shows the whole home’s energy flow, not just the battery, because the aGate is metering everything — owners tend to use it more than a battery-only app.
• Generator integration is the feature owners in hurricane and wildfire country talk about most: the battery covers the short outages and the generator recharges it through the long ones.
• Load shedding means the system decides what to drop when the battery runs low, which is a comfort in an outage and something to configure deliberately on day one.
• The warranty is framed around energy throughput as well as years, so a household that cycles the battery hard should understand how that is counted.

Four questions to ask any FranklinWH quote

1. Is the aGate in this quote, and where does it sit relative to my main panel?
2. How is my existing solar being metered through the system?
3. Which loads shed first when the battery runs low, and can I change that?
4. If I add a generator later, what has to be true about it for the system to accept it?

Grid connection in Salt Lake City

• Utility interconnection — A FranklinWH installation in Salt Lake City requires checking interconnection requirements with the delivery utility for the exact address. Identify the utility from the bill or official service map. Ask the installer to identify the equipment and complete-system approvals required for the proposed configuration, file the application and flag any constraint in the quote.
• Electrical permit and inspection — the install needs an electrical permit from the local permitting authority and an inspection before it is switched on. Ask whether permit fees and the inspection are inside the FranklinWH quote.
• Backup scope is a design decision — whole-home versus a backup sub-panel depends on your main service panel and the transfer hardware, not on the battery alone. Have the circuits that stay live listed by name on the quote.

Ready for FranklinWH quotes in Salt Lake City?

Request FranklinWH quotes for Salt Lake City, subject to participating-installer availability.

Get my FranklinWH quotes for Salt Lake City

Geography around Salt Lake City

This page covers the wider Salt Lake City area. A quote request uses your ZIP code; matches depend on current participating installers for your address and preferred brand.

ZIP codes in Salt Lake City: 84116, 84104, 84103, 84108, 84106, 84105, 84044, 84102, 84115, 84101, 84109, 84128, 84111, 84112, 84119, 84113, 84114, 84150, 84180, 84138.

Nearby places shown for geographic context:

• North Salt Lake (84054) · 4.9 mi from Salt Lake City
• South Salt Lake (84115) · 5.2 mi from Salt Lake City
• Woods Cross (84087) · 6.7 mi from Salt Lake City
• West Valley City (84120) · 7.5 mi from Salt Lake City
• Bountiful (84010) · 7.5 mi from Salt Lake City
• Millcreek (84109) · 8.1 mi from Salt Lake City
• Taylorsville (84129) · 8.3 mi from Salt Lake City
• West Bountiful (84087) · 8.7 mi from Salt Lake City
• Murray (84107) · 9.0 mi from Salt Lake City
• Kearns metro township (84118) · 9.6 mi from Salt Lake City
• Holladay (84117) · 9.9 mi from Salt Lake City
• Emigration Canyon metro township (84108) · 9.9 mi from Salt Lake City
• Centerville (84014) · 10.6 mi from Salt Lake City
• Midvale (84047) · 11.4 mi from Salt Lake City
• West Jordan (84081) · 12.6 mi from Salt Lake City
• Cottonwood Heights (84121) · 12.8 mi from Salt Lake City
• Magna metro township (84044) · 13.2 mi from Salt Lake City
• Farmington (84025) · 14.4 mi from Salt Lake City
• Sandy (84092) · 14.8 mi from Salt Lake City
• White City metro township (84094) · 14.9 mi from Salt Lake City
• South Jordan (84095) · 15.7 mi from Salt Lake City
• Granite (84092) · 15.7 mi from Salt Lake City
• Copperton metro township (84006) · 17.0 mi from Salt Lake City
• Fruit Heights (84037) · 17.5 mi from Salt Lake City
• Kaysville (84037) · 17.5 mi from Salt Lake City
• Riverton (84065) · 18.0 mi from Salt Lake City
• Summit Park (84098) · 18.1 mi from Salt Lake City
• Lake Point · 18.7 mi from Salt Lake City
• Draper (84020) · 19.6 mi from Salt Lake City
• Herriman (84096) · 20.3 mi from Salt Lake City
• Brighton (84121) · 20.6 mi from Salt Lake City
• Layton (84041) · 20.8 mi from Salt Lake City
• Bluffdale (84065) · 20.9 mi from Salt Lake City
• Snyderville (84098) · 20.9 mi from Salt Lake City
• Alta (84092) · 21.1 mi from Salt Lake City
• Silver Summit (84098) · 21.9 mi from Salt Lake City
• Stansbury Park (84074) · 22.0 mi from Salt Lake City
• Morgan (84050) · 22.5 mi from Salt Lake City
• Syracuse (84075) · 22.5 mi from Salt Lake City
• Clearfield (84015) · 22.6 mi from Salt Lake City
• Erda (84074) · 22.6 mi from Salt Lake City
• Alpine (84004) · 23.2 mi from Salt Lake City
• East Basin (84098) · 24.4 mi from Salt Lake City
• Park City (84060) · 24.4 mi from Salt Lake City
• South Weber (84405) · 24.7 mi from Salt Lake City
• Lehi (84043) · 25.0 mi from Salt Lake City
• Highland (84003) · 25.2 mi from Salt Lake City
• Tooele (84074) · 25.7 mi from Salt Lake City

FranklinWH installers across Utah, town by town

Every FranklinWH page in Utah, nearest to Salt Lake City first.

• FranklinWH installers West Valley City — 7 mi
• FranklinWH battery installation West Jordan — 12 mi
• FranklinWH battery installation Provo — 40 mi
• FranklinWH battery installers in St. George — 270 mi

Beyond FranklinWH in Salt Lake City

Comparing FranklinWH with another brand in Salt Lake City? See Sol-Ark battery installers in Salt Lake City, EG4 battery installation Salt Lake City, Generac installers Salt Lake City, Fortress Power battery installation Salt Lake City, Canadian Solar / EP Cube installers Salt Lake City, SMA battery installers in Salt Lake City.

FranklinWH questions, Salt Lake City answers

Does FranklinWH work with solar from another brand in Salt Lake City?

Yes — this is the main reason to choose it. The system is AC-coupled and FranklinWH states the aGate is compatible with micro- and string inverters from the major brands, so your existing solar keeps its inverter and the aGate meters it. Ask the installer to confirm your specific inverter model against FranklinWH’s compatibility list before you sign.

Is the aGate really necessary for a Salt Lake City home?

It is the product. The aPower 2 is a strong battery on its own, but everything that distinguishes FranklinWH — whole-home management, load shedding, generator integration, metering of your existing solar — lives in the aGate. A quote without one is quoting a different, lesser system.

Can FranklinWH work with a generator in Salt Lake City, UT?

Yes, and it is one of the strongest reasons to pick it in hurricane, wildfire and ice-storm country. The aGate has a generator input so a standby or portable generator can recharge the battery during a long outage, with the battery covering the short ones on its own. The generator has to be compatible and the transfer arrangement designed properly — ask for both in writing.

How many aPower 2 units do I need if I live in Salt Lake City?

One large block covers the evening peak and a short outage for most homes; a second is what turns it into a multi-day backup plan for a house with central air. The aGate can manage a stack of units, so you can start with one and add later. Ask the installer to size to your outage plan, not just your bill.

Is the FranklinWH aPower 2 UL 9540 listed for Salt Lake City households?

FranklinWH lists the aPower 2 as certified to UL 9540 and UL 9540A among its safety standards, which is what most permitting authorities and utilities require on a residential storage application. Your installer files the listing with the permit and interconnection paperwork.

Will FranklinWH run my whole house in an outage across Salt Lake City?

That is what it is designed to do, within the limits of your battery capacity. The aPower 2 has a high continuous output and the aGate sheds lower-priority loads as the battery runs down, so the house stays live on what matters. Whether it lasts through the night depends on how many units you have and what is running — ask for a load model, not a promise.

Do I need a FranklinWH certified installer in Salt Lake City?

FranklinWH runs its own certified-installer program, and because the aGate is doing electrical work at the service panel, you want someone who has commissioned several of them. Ask the crew how many FranklinWH systems they have installed and whether the aGate placement they are proposing is the one they have done before.

Who installs a FranklinWH battery in Salt Lake City?

You can request FranklinWH quotes for Salt Lake City. Matching depends on current participating installers for your address and brand; there may be fewer than three or no matches. This city page does not establish installer availability. Free for homeowners.

How do I compare FranklinWH quotes in Salt Lake City?

Installed prices move constantly and vary by site, so compare on dollars per usable kWh rather than headline totals — and only once the scope matches. For this brand the variables that matter are: whether the aGate is quoted as the core of the system or as an add-on — it is the core; how many aPower 2 units, and whether the stack is sized to your outage plan or to your evening peak; whether generator integration is included, and what kind of generator the design assumes. Compare any available quotes on the same scope, then compare the installers harder than the numbers.

What battery incentives apply in Salt Lake City?

The federal Residential Clean Energy Credit ended for systems placed in service after December 31, 2025, so a 2026 FranklinWH install in Salt Lake City does not get the old 30% credit — a quote that still shows it needs re-pricing. No Utah battery program has been verified on this site yet; ask each installer what your utility offers and to show the program page, not a brochure line.

Who approves a FranklinWH install in Salt Lake City?

Your electric utility, through an interconnection application, and the local permitting authority, through an electrical permit. A good installer files both and flags any constraint in the quote — not after. What gets scrutinized depends on the configuration: the aGate placement relative to the main service panel is the design decision that decides how much electrical work the job needs.

Are your Salt Lake City installers FranklinWH-certified?

We do not have a current participating-installer record establishing FranklinWH certification or availability for every address in Salt Lake City. If a match is available, verify the specific crew, current license, brand training and relevant installation experience before signing.

Is a FranklinWH battery worth it in Salt Lake City?

Salt Lake City averages 4.8 peak sun hours in NASA POWER climatology. That does not establish household solar output, battery cycling or savings. Wildfire-season Public Safety Power Shutoffs and summer heat-wave grid strain are the outages homeowners here plan around. Ask for a site-specific production and load assessment, plus the import price and export credit on your actual plan. Confirm the delivery utility and any separate retail provider for your address.

Answered what you needed?

Request FranklinWH quotes for Salt Lake City, subject to participating-installer availability — free, no obligation.

Get my FranklinWH quotes for Salt Lake City