San Francisco · CA · SolarEdge Home Battery

SolarEdge battery installers in San Francisco, CA.

Get matched with top solar companies in San Francisco

Get your SolarEdge quotes for San Francisco

SolarEdge Home Battery wall unit

Do you have solar already?

No, nothing yetSolar and battery together Yes, panels onlyBattery retrofit — the most common job Yes, panels and a batteryWe'll check you're getting everything out of them

Vetted installers only — typically 2+ years in business, decent reviews.

  • ✓ DC-coupled inside a SolarEdge system — no second conversion step
  • ✓ Free for homeowners, no obligation — quotes only if you ask

The fourth most-quoted home battery on US installer quotes, almost always inside a SolarEdge solar system.

  • ✓ 100% free, no obligation
  • ✓ Up to 3 vetted installers — and no one else sees your details
  • ✓ Vetted installers — typically 2+ years in business

Get my SolarEdge quotes for San Francisco Get my SolarEdge quotes — free · up to 3 vetted installers · takes about a minute.

What a SolarEdge system actually is

SolarEdge Home Battery wall unit

The SolarEdge Home Battery 400V is a DC-coupled battery built to hang off a SolarEdge Home Hub inverter, so the question it answers is narrow: you are building or already own a SolarEdge system and want storage inside it. Coupled that way it avoids a second conversion step and reports into the same app as the panel-level optimizers. Up to three batteries stack on one inverter, backup needs an additional interface, and the whole thing is passively cooled and near-silent. If your solar is not SolarEdge, this is the wrong product, and a quote that puts it on someone else’s inverter has made a mistake.

  • Home Battery 400V — Single unit, up to three per inverter. DC-coupled battery matched to the SolarEdge Home Hub inverter — the storage half of a SolarEdge system.
  • Home Hub inverter — One per system. The hybrid inverter that runs the panels, the optimizers and the battery; the battery does not work without it.
  • Backup Interface — Required for backup. The additional component that isolates the home in an outage. Check whether it is in the quoted price.

SolarEdge at a glance — sourced

  • Current SolarEdge line-up in the US: Home Battery 400V (BAT-10K1P) (9.7 kWh usable). source
  • SolarEdge is DC-coupled: the battery and inverter are one system, so on a retrofit the existing solar inverter is replaced rather than kept. source
  • Usable capacity runs from 9.7 kWh to 29.1 kWh. source
  • Capacity can be added later without replacing the inverter. source
  • The manufacturer warranty is 10 years. source
  • It works with SolarEdge's own inverters only. source
  • Listed models are certified to UL 9540, the safety standard permit offices and utilities check for home storage. source

A good fit in San Francisco if…

  • Homes already running a SolarEdge Home Hub inverter that want storage without changing anything else
  • New SolarEdge installs where the panels, optimizers and battery are designed together
  • Buyers who want one warranty owner across the whole solar-and-storage system
  • Households that want a quiet indoor install

Look at something else if…

  • Your solar is not SolarEdge — an AC-coupled battery keeps your inverter; this one replaces it
  • You want a large system beyond three units, or capacity in small increments
  • You want generator integration in the base design
  • You want the widest choice of installers — this is a specialist system

A SolarEdge in San Francisco performs exactly as well as its configuration — and the configuration is decided by whoever installs it.

Why the installer matters more than the battery

The hardware is rarely the problem on a bad battery install — the design, the panel work and the commissioning are. Installers are vetted before they join — typically 2+ years in business with a track record of decent reviews. Your San Francisco inquiry goes to 2-3 of them, and nobody else.

What specifically goes wrong on a SolarEdge install

  • Putting the battery on an older or non-Hub SolarEdge inverter is the classic mistake; the inverter model has to be confirmed before anything is priced
  • Backup without the Backup Interface is not backup; a quote that omits it is quoting a self-consumption-only system
  • The battery has a stated ambient temperature window; a mounting spot outside it in summer or winter is a warranty and performance problem
  • Multiple batteries on one inverter need the right branch connection hardware, which an inexperienced crew leaves out

This is exactly what we vet for — get my SolarEdge quotes in San Francisco.

That's why SolarEdge quotes in San Francisco are only comparable when the scope matches. Here's what to hold constant.

Comparing SolarEdge quotes in San Francisco

We don't publish price bands, because installed prices move constantly and depend on your roof, service panel and utility. What we can tell you is what to hold constant so three quotes are actually comparable — match these first, then compare dollars per usable kWh.

  1. Whether your existing inverter is a SolarEdge Home Hub or needs replacing — the biggest swing in a SolarEdge quote
  2. How many batteries, up to three on one inverter, and whether the inverter is sized for them
  3. Whether the Backup Interface for outage backup is included
  4. Whether panel-level optimizers are already on the roof or are being added
  5. Mounting: floor or wall, indoors or out, and the temperature range at that spot

A cheaper quote that skips backup hardware, assumes an inverter you don't have, or quietly changes the configuration isn't cheaper — it's a different job.

Want three SolarEdge quotes you can actually compare? Your inquiry goes to up to 3 vetted installers in San Francisco, all quoting the same scope.

Battery incentives in California

  • Residential Clean Energy Credit (IRC §25D) (federal) — The 30% federal tax credit for home solar and battery storage no longer applies to systems placed in service from January 1, 2026. What ended and what still applies
  • California — no state battery program has been verified on this site yet. Ask each installer what City & County of San Francisco offers and to show the program page.

Still weighing a SolarEdge up? The San Francisco numbers and the deeper reading are below.

The San Francisco numbers

San Francisco's 30 ZIP codes sit mostly on City & County of San Francisco, a publicly owned utility whose interconnection rules and rate plans are set by its own board rather than by the California utility commission. For a SolarEdge system that matters at quote stage: ask each installer how City & County of San Francisco handles a battery interconnection and what it credits for exported energy, because the answer can differ from the investor-owned utilities elsewhere in California.

City & County of San Francisco's residential rate averages about 24.1¢ per kWh on the 2024 OpenEI utility rate file — close to the middle of the national range. In San Francisco the bill case for a SolarEdge depends on the rate plan more than on the flat average: a time-of-use plan with a steep evening price makes the battery work much harder than a flat rate does, so ask each installer which plan the savings on the quote assume.

San Francisco — 827,526 residents in San Francisco County — is a large enough market that several installers will hold SolarEdge certification, so compare them on SolarEdge work already commissioned on City & County of San Francisco rather than on price alone.

San Francisco averages 4.4 peak sun hours a day on NASA POWER's climatology, on the lower side for the US, and the winter months run well below that. For a SolarEdge the practical question is what the array can refill on a short winter day; an installer who sizes on the annual figure will oversell the capacity.

San Francisco swings from about 6.9 peak sun hours in Jun to 2 in Dec — roughly 3.5× more generation in the best month than the worst. On a 10 kW array that is around 58.7 kWh a day in Jun against 17 kWh in Dec. Size a SolarEdge on the winter figure: SolarEdge is single unit, up to three stacked, so the honest question at quote stage is what it can actually refill on a 17 kWh day, not what it holds on paper.

Show month-by-month generation
Month-by-month generation for a 10 kW array in San Francisco
MonthPeak sun hours10 kW array, kWh/day
Jan2.420.4 kWh
Feb3.328.1 kWh
Mar4.538.3 kWh
Apr5.849.3 kWh
May6.353.6 kWh
Jun6.958.7 kWh
Jul5.445.9 kWh
Aug4.840.8 kWh
Sep4.639.1 kWh
Oct3.731.5 kWh
Nov2.723 kWh
Dec217 kWh

Monthly figures from the NASA POWER climatology (2001–2020) at San Francisco's coordinates; annual average 4.4 peak sun hours; 85% system derate.

SolarEdge vs Enphase IQ Battery

  • Where SolarEdge wins — A cleaner, quieter single-ecosystem install for a SolarEdge home, DC coupling that avoids a second conversion, and one warranty owner across inverter, optimizers and battery.
  • Where SolarEdge loses — It only works inside a SolarEdge system, so it is a poor retrofit onto any other solar; backup needs an extra component; and it stops at three units.

We don't sell batteries, so we have no reason to talk one up.

What owning a SolarEdge is actually like

Spec sheets stop being interesting about a week after install. These are the things owners notice in year one.

  • The app reports panels, optimizers, battery and EV charging in one place, which is the reason people who already own SolarEdge solar rarely look elsewhere for storage.
  • It is passively cooled and quiet enough to live in a utility room without anyone noticing it is there.
  • Because the battery, inverter and optimizers come from one company, warranty and support have one owner — a genuine simplification when something goes wrong.
  • Adding a second or third battery later is straightforward as long as the inverter was sized for it on day one — ask.

Four questions to ask any SolarEdge quote

  1. Which SolarEdge inverter model is this battery being connected to, and is it staying or being replaced?
  2. Is the Backup Interface included, and which circuits does it back up?
  3. Is the inverter sized for a second or third battery if I add one later?
  4. Where will it be mounted, and does that spot stay inside the operating temperature range?

Grid connection in San Francisco

  • City & County of San Francisco interconnection — a battery in San Francisco needs an interconnection application with City & County of San Francisco. A good installer files it, confirms the UL 9540 listing on the exact SolarEdge model quoted, and flags any constraint in the quote — not after.
  • Electrical permit and inspection — the install needs an electrical permit from the local permitting authority and an inspection before it is switched on. Ask whether permit fees and the inspection are inside the SolarEdge quote.
  • Backup scope is a design decision — whole-home versus a backup sub-panel depends on your main service panel and the transfer hardware, not on the battery alone. Have the circuits that stay live listed by name on the quote.

Ready for SolarEdge quotes in San Francisco?

See what 3 vetted installers would quote a SolarEdge in San Francisco — ZIP code in, quotes out.

Get my SolarEdge quotes for San Francisco

Areas served around San Francisco

Matching covers the wider San Francisco area, not just the center — inquiries route on your ZIP code.

ZIP codes in San Francisco: 94124, 94112, 94122, 94132, 94134, 94121, 94116, 94110, 94129, 94131, 94118, 94127, 94107, 94114, 94103, 94117, 94115, 94123, 94109, 94130, 94102, 94133, 94158, 94105, 94111, 94108, 94188, 94104, 94501, 94920.

Nearby places we match in:

  • Bolinas (94924) · 22.0 mi from San Francisco
  • Stinson Beach (94970) · 24.1 mi from San Francisco
  • Muir Beach (94965) · 26.3 mi from San Francisco

SolarEdge installers across California, town by town

Every SolarEdge page in California, nearest to San Francisco first.

Comparing with the nearest big city? SolarEdge battery installers in Los Angeles

Beyond SolarEdge in San Francisco

Comparing SolarEdge with another brand in San Francisco? See Tesla Powerwall installers San Francisco, FranklinWH battery installation San Francisco, Enphase battery installation San Francisco, Sigenergy battery installers in San Francisco.

SolarEdge questions, San Francisco answers

Does the SolarEdge Home Battery work with other inverters in San Francisco?

No. It is DC-coupled to the SolarEdge Home Hub inverter — SolarEdge’s own datasheet lists that as the compatible inverter family — so it is a battery for SolarEdge systems. If your solar runs on another brand’s inverter, adding this battery means replacing the inverter; an AC-coupled battery would keep it.

I already have SolarEdge solar. Is this the obvious battery for a San Francisco home?

Usually, yes — provided your inverter is a Home Hub model. It couples on the DC side, reports into the same app as your optimizers, and keeps warranty and support with one company. The first thing to confirm is the exact inverter model, because older SolarEdge inverters are not battery-ready and a replacement changes the quote entirely.

Is the SolarEdge Home Battery UL 9540 listed in San Francisco, CA?

Yes. SolarEdge’s North America datasheet lists the Home Battery 400V to UL 9540, UL 9540A and UL 1973, which is what most permitting authorities and utilities ask for on a residential storage application. Your installer files the listing with the permit and interconnection paperwork.

How many SolarEdge batteries can I have if I live in San Francisco?

Up to three on one Home Hub inverter, per SolarEdge’s datasheet. That is enough for most homes, and it is the ceiling — if your plan is a very large system, a modular stack from another brand goes further. Have the installer confirm the inverter is sized for the number you might eventually want, not just the number you are buying today.

Does the SolarEdge battery provide backup in an outage for San Francisco households?

It can, with the Backup Interface — an additional component SolarEdge notes may be required along with a firmware update, subject to local regulation. Without it the system does self-consumption only. Ask whether the interface is in the quote and which circuits it will keep live.

Can the SolarEdge battery be installed outdoors across San Francisco?

Yes — the datasheet rates it for indoor and outdoor installation, floor or wall mounted. The practical constraint is temperature: it has a stated ambient operating window, and the warranty attaches conditions to it, so an unshaded wall in a desert summer or an exposed spot in a northern winter is worth avoiding. A garage or utility room is the easy answer.

Is a SolarEdge battery quiet in San Francisco?

Very. It is passively cooled — no fans — and the datasheet gives a noise figure low enough that it is one of the quieter home batteries you can buy. That makes it a reasonable candidate for a utility room or a wall shared with living space, which is not true of every battery on this list.

Who installs SolarEdge batteries in San Francisco?

We match your inquiry with 2-3 vetted installers serving San Francisco — typically 2+ years in business, with a track record of decent reviews, checked on state licensing and trading history, and carrying SolarEdge certification where they have it. You get 2-3 of them and nobody else does. Free for homeowners.

How do I compare SolarEdge quotes in San Francisco?

Installed prices move constantly and vary by site, so compare on dollars per usable kWh rather than headline totals — and only once the scope matches. For this brand the variables that matter are: whether your existing inverter is a SolarEdge Home Hub or needs replacing — the biggest swing in a SolarEdge quote; how many batteries, up to three on one inverter, and whether the inverter is sized for them; whether the Backup Interface for outage backup is included. Get all three quotes on the same scope, then compare the installers harder than the numbers.

What battery incentives apply in San Francisco?

The federal Residential Clean Energy Credit ended for systems placed in service after December 31, 2025, so a 2026 SolarEdge install in San Francisco does not get the old 30% credit — a quote that still shows it needs re-pricing. No California battery program has been verified on this site yet; ask each installer what your utility offers and to show the program page, not a brochure line.

What does City & County of San Francisco need to approve for a SolarEdge in San Francisco?

A battery in San Francisco needs an interconnection application with City & County of San Francisco and an electrical permit from the local authority, and a good installer files both and flags any constraint in the quote — not after. What gets scrutinized depends on the configuration: putting the battery on an older or non-Hub SolarEdge inverter is the classic mistake; the inverter model has to be confirmed before anything is priced. Ask the installer to confirm the UL 9540 listing on the exact model quoted, which is what the utility and the permit office check.

Are your San Francisco installers SolarEdge-certified?

Certification is one of the things we look at, and where a SolarEdge-certified installer covers San Francisco you'll see that in the match. It is deliberately not the only filter — a current certification says the installer has done the brand's training, not that they wire a good panel or come back in year three. Every installer serving San Francisco is vetted on the same bar set out above before they join. Ask the ones you're matched with what SolarEdge work they've actually done, and how much of it, before you sign.

Is a SolarEdge battery worth it in San Francisco?

San Francisco averages 4.4 peak sun hours, so a 10 kW rooftop array generates roughly 37.4 kWh on an average day — enough to cycle a SolarEdge on most days of the year. Wildfire-season Public Safety Power Shutoffs and summer heat-wave grid strain are the outages homeowners here plan around. Whether the bill side stacks up depends on what City & County of San Francisco credits for exported solar against what it charges you — City & County of San Francisco averaged about 24.05¢/kWh for residential customers in 2024 — so ask each installer to show that gap on your own rate plan.

Answered what you needed?

Get your 2-3 vetted SolarEdge quotes for San Francisco — free, no obligation.

Get my SolarEdge quotes for San Francisco

Local data reviewed by the Shortlist Solar team. We vet every installer in our network ourselves — state licensing, manufacturer certifications and trading history. San Francisco data: NASA POWER (sun hours), the US Census Bureau (places and ZIP codes) and the EIA/OpenEI utility file (City & County of San Francisco). SolarEdge product figures are sourced below. Last verified 2026-09-05. Page updated September 5, 2026.

All California locations · All SolarEdge locations · How it works